Carbon Monoxide Detector Placement - X- Sense

It is a fact that science has become a blessing for humanity, as it has invented many useful inventions for human beings. Carbon monoxide detectors are one of the beneficial devices. So, today we will discuss about Carbon monoxide detector placement, where should a carbon monoxide detector be placed, and how can we install carbon monoxide detectors to prevent carbon monoxide poisoning. So, the following discussion will help you in doing this job effectively.

What is Carbon Monoxide?

It is a gas having no color, taste, and odor, which is produced by burning wood, propane, gasoline, charcoal, and any other type of fuel. It is used in tightly sealed spaces such as engines that can allow it to accumulate, which is dangerous. Due to the presence of harmful content in it, one should inhale fresh air and contact with the doctor immediately in case of an emergency. Usually, it is caused by inhaling combustion fumes.

Where to Place Carbon Monoxide Detectors

For the sake of your home security, when you decide to buy a carbon monoxide smoke alarm as a separate appliance, it is imperative to install it in the proper place. Moreover, every portion of the house should have a separate carbon monoxide alarm. If your garage is attached to your home, one device should be installed in it for sure. In addition, carbon monoxide detectors should be installed outside sleeping bedrooms. It is impossible to detect the presence of Carbon monoxide gas while you are sleeping. If it is detected, then the alarm will go off to warn you. You should always remember the following tips while placing your detector anywhere in your house.

1. Check Before Installation

You should check the device before installing it by underwriters Laboratories for your security needs.

2. Read Manuals

Before installing the device, you should always go through manual guides.

3. Proper Distance

The CO detectors should be installed at a distance of 10 feet from your attached garage with your home.

4. Precautionary Measures

• Do not install the carbon monoxide detectors near the fossil fuel area to void the false detection.
• Do not install it in the direct sunlight to prevent it from overheating.
• It should not be installed in wet areas like washrooms.
• The CO detectors should be out of reach of children to avoid damage.
• It should not be installed near windows.
• Do not place them behind the curtains, doors, and cabinets.
• You should install the detectors at your height of the knee.
• To ensure its proper working, test the detector every month.
• Your detector should be cleaned and free of dust, dirt, and other particles, which can affect it’s working.

Carbon monoxide gas is harmful to human health. For the security of our lives, you should know about where should we place these detectors in our homes. You may also hire the services of professionals for this matter, to avoid accidents later on.