September Deals - 8% OFF for All with Coupon: XSENSE1SHOP NOW X
Ever got up from bed at night to the sound of chirping carbon monoxide detectors? Or perhaps you can’t sleep hearing these consistent beeps and chirps. Let’s face it – constant beeps and chirps from your carbon monoxide detector can be downright annoying and disturbing!
The next content will give the common reasons why your carbon monoxide detector always beeps and chirps. We’ll also suggest solutions to help you how to fix the false alarms.
To understand sounds coming from your device, let’s look into the mechanism of how carbon monoxide alarms work first. Carbon monoxide alarms contain special sensors that detect carbon monoxide levels in the air. The most common one is called an electrochemical sensor.
In electrochemical sensors, the device contains a chemical solution with electrodes immersed in it. When the detector senses carbon monoxide, electrical currents in the chemical solution change. A significant change prompts the alarm to go off. After a detector has sounded an alarm, it can only be reset by placing it in a carbon monoxide-free environment.
There are various sound signals that your carbon monoxide detector emits. It’s best to check your individual device’s user manual for the specifics. But generally, most carbon monoxide detectors sound off these patterns:
This alarm pattern consists of four short beeps, followed by silence for five seconds, and then another four short beeps. Four-beep alarms are loud and continuous. It can indicate two possible incidences:
If your carbon monoxide detector is on battery back-up (or disconnected from a 120V power source), the four-beep alarm pattern continuously sounds for five minutes after sensing carbon monoxide. The cycle repeats itself every minute thereafter.
Do you hear one consistent chirp every 30 seconds? This type of sound pattern may mean:
At times, you may hear beeps and chirps without an established pattern. Such sounds could be due to:
Your device letting out one long and continuous squeal? Your carbon monoxide detector may have:
So, what do you do when your carbon monoxide detector sounds off its alarms, beeps, or chirps? Here are some things you should consider:
Survey your surroundings and move everyone to fresh air if you hear your detector’s alarm. This is crucial even if your device happens to let out only a false alarm. It’s best if you have an escape plan laid out beforehand to make evacuation easier.
Immediately look for the following symptoms of carbon monoxide poisoning in your companions and pets:
All of these symptoms happen because carbon monoxide quickly enters your system and replaces oxygen in your blood. If left undetected, these symptoms can swiftly progress to long-term health consequences.
Also, note that your pets may be affected by carbon monoxide poisoning earlier than humans do. Check if they’re weak or unresponsive. Move them out quickly along with your family members if you hear your carbon monoxide alarm sound off.
After you’ve moved everyone out to safety, immediately call emergency services or your local fire department. Let them survey your property right away.
If in case you left any family member inside your property, never attempt to enter your house again. Emergency services will search and rescue your family member for you.
Emergency services or the fire department will check your property and see if you did have a carbon monoxide leak. They can also determine if your detectors only sounded off a nuisance or false alarm. They’ll then advise you when you can safely come back to your property.
Let an expert inspect your carbon monoxide detectors after an emergency. This is important so that you’re sure your detectors still work properly after it has all sounded off. This could also prevent problems that may give rise to false alarms, beeps, and chirps.
If you’re confident that your detector is only beeping or chirping (not sounding off an actual alarm or false alarm), you can just check your device immediately for any problems. Keep in mind the beep patterns we previously discussed.
Address any issues you see in the device. For instance, you can:
See if the beeping or chirping stops. If it doesn’t, consider having an expert see the devices. You can also replace the units, especially if they’re already 7 years and above.
Regularly test the alarm system and detector units. The Testing of smoke detector is required once a month.
Take one day to check your detectors physical condition, batteries, and circuits (if hardwired). After that, push the test button on your device to check if your entire carbon monoxide detector system is functioning properly. Station some family members on areas where the detectors are; they should be able to hear the alarms go off once you’ve started testing the detector system.
Testing should ideally be a part of your housekeeping routine. However, many people forget to test their carbon monoxide detectors.
Remember to always take time to test the smoke detectors system and don’t just brush it off. In fact, basic testing is as easy as pushing a button on your detectors or smartphone (if you use a modern smart detector)!
Now you’re aware of the reasons why your carbon monoxide alarm is beeping or chirping. Sounds your detector gives off communicate things going on in your environment and the device itself. Beeps or chirps have several causes, while alarms and false alarms can also happen at any time.
In any case, keep your family safe all the time by heeding your carbon monoxide detectors’ alarms!