September Deals - 8% OFF for All with Coupon: XSENSE1

SHOP NOW X

How to Stop Smoke Detector Beeping or Chirping

By WenSue |

Have you ever wondered like "Why is my smoke detector beeping?"". At some point, we have all thought about this, and we don’t usually get the answer. The irritating noise it makes, pops a question that do we even need a smoke detector? The answer is – Yes, we do need smoke detectors to stay safe. In this article, we will be talking about how you can stop the smoke detector from beeping and chirping and where you should install alarms.  

What is Causing the Smoke Alarm to Sound, Beep, or Chirp?

1. Loud, Continuous Alarming

A smoke alarm only starts to beep when it detects that there are combustible products in its vicinity. The beeping in the alarm continues until it detects that the smoke has cleared. When this is not the case, a false smoke alarm may be activated. There are various reasons why it happens. Firstly, the battery of the alarm may be loosely inserted or not installed properly, which in turn leads to false activation. The sensing chambers sometimes get clogged up, which too leads to a false alarm activation. Environmental factors also lead to false activation of a smoke alarm. Other possible reasons include – false activation due to electrical power issues or the alarm’s lifespan may have reached its end.

2. Consistent Chirping

Sometimes, a smoke alarm chirps continuously, and one of the following might be the reasons: Sometimes, when the battery goes dead, the alarm starts chirping for about 30 to 60 seconds for at least seven days. Also, there might be internal issues in the alarm, which leads to malfunctioning. There is a feature called ‘Hush’, which, when activated accidentally, leads to continuous chirping. In the case of wireless alarms, there may be interference from another similar type of system nearby.

3. Intermittent Chirping

There are several reasons behind the intermittent chirping of smoke alarms. Firstly, the loosely-placed battery or incorrect installation might be the cause. Also, when the smoke chamber of an alarm gets dirty, it misunderstands that there is smoke, which in turn leads to constant intermittent chirping. There are several environmental factors, such as excess humidity, or sudden steam, which make the smoke alarm chirp constantly.

How to Temporarily Silence Your Alarms

1. What to do if you have a nuisance or false alarm:

Many times, it happens that the smoke alarm gets falsely activated, and as a result, there is constant beeping or chirping. To deal with the nuisance of a false alarm, there are several ways In which you can deal with it. You can choose to silence your alarms temporarily. Another way to make the beeping stop is to clean up your alarm and reset it. Doing this will make the alarm stop as the settings will get restored to basics.

2. How to temporarily silence your alarms:

Do not use the HUSH feature when there is an ongoing fire. Use it only after there is confirmation of no more danger. The HUSH feature, which comes in-built in most alarms, gives the option to desensitize an alarm temporarily. One can use this feature to deactivate the alarm for approximately eight minutes. It is highly advised that the HUSH feature must only be turned on when there is a non-dangerous alarm condition. i.e., emission of smoke due to cooking.

  • In hard-wired alarms, all you need to do is hush the central or initiating unit. Doing so will, in turn, make all the other alarms that are interconnected, stop.
  • To desensitize the alarm, all one needs to do is push the button labeled as “Hush/Test”. The button is present on the cover of the alarm. If the smoke has low density, the alarm will detect it and get silenced on its own.
  • Once 8 minutes are over, the alarm will reset. If combustion particles have still not cleared out, the alarm will send out a signaling sound.
  • One can easily use the HUSH feature multiple times as long as there is still smoke present.
  • When the button labeled as ‘Test/Hush’ is pressed, the hushing period of the smoke alarm will come to an end.