X-Sense SC06 Combination Smoke and Carbon Monoxide Alarm
- 2-in-1 Protection
- Built with dual sensors that work independently to detect both smoke and CO concentrations, delivering reliable protection.
- Low-Battery Warning
- When the battery is low, the LED will flash yellow with 1 beep every 60 seconds, indicating it is time to replace the whole unit.
- Intelligent Chipset
- Built with an advanced chipset to provide accurate, responsive detection, giving you instant warning of fire or a CO threat.
- 10-Year Battery
- Boasts a 10-year lithium battery to ensure continuous power throughout the alarm’s lifespan, saving you the hassle of frequent battery replacement.
- LED Indicator
- Uses a 3-color LED (red, green, yellow) and audible beeping patterns to clearly inform you of its working status at a glance.
- Self-Check Function
- Tests its critical systems every 60 seconds to ensure accurate alerts are delivered rapidly if smoke or CO is detected.
Rapid Detection of 2 Deadly Dangers
This unit has both a photoelectric smoke sensor and an electrochemical CO sensor for detection of both smoke and CO. It is equipped with clear LED indicators and audible alerts to inform you of danger when an alarm sounds.
Continuous 24/7 Monitoring
This unit comes with a sealed lithium battery that lasts for the entire lifetime of the alarm and will monitor your home 24/7. A low-battery warning will let you know when it is time to replace the entire unit.
Easy to Mount
Featuring a slim, contemporary design, this alarm unobtrusively mounts onto any wall or ceiling. Simply install the unit onto any wall or ceiling with the included mounting bracket, screws, and anchor plugs.
Durable and Dust-Proof
Made from premium PC, this alarm is high-temperature resistant and corrosion-resistant to ensure exceptional quality. The inside isolation plate prevents dust from entering into the electronic circuit board, extending its lifespan.
|Item Model Number||SC06|
|Operating Life||10 years|
|Power Source||3 V CR123A lithium battery (non-replaceable)|
|Sensor Type||Smoke: photoelectric; CO: electrochemical|
|Safety Standards||EN 14604:2005, EN 50291|
|Standby Current||< 6 µA (avg.)|
|Alarm Current||< 60 mA (avg.)|
|Operating Temperature||40–100°F (4.4–37.8°C)|
|Operating Relative Humidity||10%–85% (non-condensing)|
|Alarm Loudness||≥ 85 dB at 10 ft (3 m)|
|Silence Duration||Smoke: ≤ 9 minutes; CO: ≤ 6 minutes|
|Indicator Light||LED (red/yellow/green)|
|Installation Method||Screw fixings and mounting bracket supplied|
|Usage||Indoor use only|
|Product Weight||0.63 lb (284 g)|
|Product Dimensions||5.7 x 5.7 x 2.0 inches (146 x 146 x 51 mm)|
|Package Contents||1 x Alarm Unit + 1 x Mounting Bracket + 3 x Screws + 3 x Anchor Plugs + 1 x User Manual|
Does this alarm blink green once every 60 seconds like other X-Sense models do?
Yes, the LED indicator flashes green once every 60 seconds in standby mode, indicating it is functioning properly.
If the alarm goes off, how can I tell whether it was triggered by smoke or carbon monoxide?
You can identify whether the alarm is triggered by smoke or carbon monoxide by beeps from the alarm. When the device is triggered by smoke, it will deliver 3 long beeps every 1.5 seconds. When the device is triggered by carbon monoxide, it will deliver 4 quick beeps every 5.8 seconds.
Can the battery be replaced if it was worn out, and what battery would I need?
No, this alarm has a built-in 10-year lithium battery that cannot be replaced. When the battery is low, you should replace the entire device.
Is this unit UL certified?
This alarm is certified to meet the UL 217 and UL 2034 standards, and is approved by the ETL.
Is this device good for high-humidity areas, such as a beach house?
No, the optimum relative humidity is 10%–85%. If the relative humidity is above 85%, the product performance and lifespan will be affected. It is not recommended to use above this optimum relative humidity.
Does this product operate without the need for wiring? Can I just turn it on and have it start operating?
Yes, this alarm is battery-operated. It requires no AC wiring or power outlets, allowing for effortless installation in any ideal location. Simply attach the mounting bracket onto the surface of a wall or ceiling with the provided screws and mount the alarm into the bracket by pushing them together and twisting the unit clockwise. After properly installed, the alarm will automatically activate.
Does it make a sound when it checks the battery and sensors every 60 seconds?
No, there is no sound when the unit automatically checks the battery and sensors.
Will steam from a shower cause it to alarm?
The alarm is not recommended to be installed in a shower room. Our product uses a photoelectric sensor to detect smoke, so high humidity, like steam coming from a hot shower, may trigger a false alarm.
Will it also detect propane gas?
No, this unit can detect only smoke and carbon monoxide. It cannot detect gas leaks from a propane tank.
Does this detector interconnect with other devices?
No, this standalone device is not interconnectable. Wireless interlinked smoke alarms are currently available, and we will launch wireless CO alarms and wireless combination alarms later this year. Please stay tuned to hear about our latest updates.