Name: SWS51 Smart Water Leak Alarm
Brand: X-Sense EN
SKU: ZASXS00017WUS
Price: 42.99 USD
Availability: InStock
Rating: 4.93 (96 reviews)

Photos

1 / 7

Hot

SWS51 Smart Water Leak Alarm - 3*Alarm+1*SBS50 Base Station(SWS54)

Function

Smart App (2.4 GHz Wi-Fi Only)
Dual Alarms on Detector & Base Station
Requires SBS50 Base Station

Quantity

Select Option

3*Alarm+1*SBS50 Base Station(SWS54)

$42.99 Save $7.00 $49.99
1*Alarm

$15.99 Save $0.00
3*Alarm

$39.99 Save $0.00

Service

Free Shipping Over $49
5-YEAR WORRY-FREE WARRANTY
60-DAY MONEY BACK GUARANTEE
Payment method

In Stock—Estimated Delivery in 3-7 Business Days

C Wayne M.

Setup was easy and my leak tests worked exactly as expected. Thanks

Janice A.

Very prompt service and easy to activate and set up on the phone.

Ronald

We have a very large home and I was very pleased to see that the range of signals from the base and satellites communicating with each other is quite huge. There have been no problems with signal loss between the equipment. Once everything was connected, I did a quick test where I put a satellite detector in my sink and put a small stream of water in it. When the water touched the sensor at the bottom of the detector, a loud alarm on the base station went off and sent a notification to my iPhone. Wow! Does this even need to be said? Can it be that simple? I've never seen something like this come together so easily. It was so effortlessly built up. What you get in the box is a base station and 3 satellite detectors. You also get a power cable and the bricks for the base station. I would recommend centring the base station in your home. The app is very good, but has one major annoyance that has been addressed in other reviews here. The pros are that the app is well laid out and easy to use. It provides a very good glimpse of your activation system, its online status, and battery levels. Speaking of batteries, they are easy to replace.

Davel

My dishwasher was linked 2 weeks ago (Jan 7, 2023). I ventured into the unfinished basement on my day off, only to find water dripping on my head. I then went upstairs to check the running dishwasher; then I removed the skirting board and saw the pump motor dripping (I have hardwood floors in my kitchen and luckily found this leak before it ruined the floor) ...... Not a good situation. The next day I purchased a new dishwasher and had it installed the following weekend. Then I found this sensor kit with a base station on Amazon.com. The sensor kit arrived today (1 week after installing the new dishwasher). I installed the whole kit in 15 minutes. I placed a new leak sensor under the new dishwasher, under the kitchen sink and under the basement water heater. I also tested each sensor by holding them in my hand and the moisture in my skin kept making them react .... , how cool! I then placed each sensor on a dry counter to disable it, .... , very impressive!

Allen

I double-checked the water leak sensor and subsequent alarm notification. I laid wet paper towels on two sets of probes (one set of probes at the bottom and one set at the top), one at a time. I watched the water leak sensor red warning light on the sensor and waited for the alarm to come calling. Of the three water sensor modules I purchased, one set of the water leak sensors at the bottom did not light up consistently (no red alert light about 80% of the time, and no app alerts to the phone). I returned that sensor and X-S promptly sent a new one, which worked fine.

Lilylay

I bought these 1 months ago after a terrible flood in my basement. I didn't want that to happen again so I was looking for a precaution that would help me catch it quickly as we don't use our basement very often. Therefore, I put these 3 sensors in the area where water is most likely to get in. Bottom line. They are effective. They sense the smallest amount of water. They send you texts and emails to alert you to problems (I put them on my iPhone on emergency notifications, so I get a chime if my phone is on vibrate). They also let you know when your Wifi is disconnected. They aren't hard to use. They definitely do the job. I have sold these to all my friends and family.

Neidorf

Setup was easy and quick. The water leak detector works well and you get an immediate alert via your phone and the X-Sense app.

Cortesian

We had a flood a few years ago when a 3 year old American (brand) water heater broke in our garage, blew a hole in the drywall and water gushed into the house. This, of course, happened late one night on a holiday weekend. I never, ever want to repeat that horrible experience!" . It took 4-5 months to reassemble our home, more than the insurance company paid for. (We wanted more control rather than handing everything over to a contractor of minimum wage workers). After a lot of research, we bought an X-Sense water detection system consisting of 3 base stations, 9 sensors and an alarm. The sensors were installed under or next to every water source in the house - toilets, sinks, washing machines, fridges, dishwashers (one sensor 2 under it), water heaters and water softeners. I am a 69 year old woman, not a programmer, and I would say that the set up was very simple.

Paul Storic

I purchased this base station and detector kit and put them behind the access panel in the basement, if the water happened again I didn't want to go through that again before it started hitting the carpet. Flash forward to this morning and the water leak sensor went off at 8.25am and pointed out the location of the leak. I ran downstairs but had to pass the ground floor bathroom where the leak had occurred over a year ago and I heard a hissing sound. I looked and the new pex ring had failed in the same place and was leaking into the basement again. This time it was obviously loose and not cracked like the last time, but the result was the same. I closed the main sluice and removed the access panel to see how much water was there and luckily the sensor quickly alerted me that there was hardly any moisture down there so that was a huge saving. I'm glad I caught this at home. This sensor is a life saver.

Ricky

I purchased this water leak system after reading some reviews. I installed it and an additional set of sensors in our surgical facility because of several previous instances of water leaks disrupting surgeries. Less than 7 days after installing the system, I received a notification to detect water at 3:00 am. The system works well and has saved us a lot of money and prevented potential flooding again due to a faulty plumbing system. The system was very easy to set up.

Cliff

We purchased this item as a safety net since the house had been built for five years. We used these for about two months and one afternoon we received a notice at the house. There was water in the washing machine area. I thought there was a malfunction in the system. To my surprise, it detected very little water on the floor by the washing machine. Highly recommended.

Boris

I have a saying in my family. When it comes to IoT things, "no clouds allowed". Smart devices are good, but they must be able to operate without an internet connection (IMO). These leak sensors can be "tied" to a X-Sense Smart Alarm and a X-Sense Smart Water Valve. If the sensor trips, the alarm will go off and the water valve will close.

SWS51 Smart Water Leak Alarm - 3*Alarm+1*SBS50 Base Station(SWS54)

Smart Water Leak Sensor

Constantly monitors home water leaks

(SBS50 Base Station Required)

Monitors Water Leaks Remotely

When a leak occurs, the base station and water leak sensor will not only sound a loud alarm, but you'll also receive instant notifications on your phone. You can silence the system simply using the app.
No Wiring or Setup Required

With a wire-free design and minimalist style, the water leak detector is perfectly conceived for where it’s needed most – those small, hard-to-reach spots. This device also lasts up to 5 years and is easily monitored through the X-Sense Home Security app for added peace of mind.

Test/Silence Button

This test/silence button allows you to silence an alarm or check if the water leak sensor’s buzzer and LED indicator are working properly. You can also test the device by tapping the Device Test button on the app’s device settings page.
Replaceable Batteries

This device runs on 2 replaceable 3-year AAA batteries. When the battery is low, you will hear a beep every 60 seconds with the LED flashing red to remind you to replace it. A low battery notification will also be sent to your phone via the app.

Specifications Of Base Station

Model

SBS50
Power Supply

Input: 100–240 V AC 50/60 Hz; Output: 5.0 V ⎓ 1.0 A
Safety Standard

EN 14604:2005+AC:2008
Operating Temperature

40–100°F (4.4–37.8°C)
Operating Relative Humidity

0–85% RH (non-condensing)
Alarm Volume

100 dB
App

X-Sense Home Security (both Android and iOS supported)
Wireless Frequency

2.4 GHz (Incompatible with 5 GHz Wi-Fi network)
Operating Frequency

915 MHz (US) / 868 MHz (EU)
Wi-Fi Transmission Range

164 ft (50 m)
Wireless Protocol

IEEE 802.11b/g/n

Specifications Of Water Leak Sensor

Model

SWS51
Power Supply

Replaceable 2 × 1.5 V AAA batteries
Operating Life

5 years
Connection Distance

1,640 ft (500 m) in open air
Battery Life

3 years
Sensor Type

Sensor probe
Operating Temperature

32–122°F (0–50°C)
Operating Relative Humidity

≤ 90% RH (non-condensing)
Alarm Volume

110 dB
Waterproof Rating

IP66

User Manual

FAQs

Can this only be used once?: The product is NOT a one-time-use product. If it sounds, just take the water leak detector out of the puddle, dry off the bottom and place it to monitor for leaks again. This product is very simple to use.

What is the product’s battery life?: The smart water leak detector is powered by 2 × 1.5 V AAA batteries with a 3-year battery life.

Does it need the hub to work with Apple Homekit?: No, it does not support Apple Homekit.

Are any other X-Sense products needed to use the smart water detector?: Yes, an X-Sense SBS50 base station is required to connect the smart water detector to the X-Sense Home Security app. When there is a water problem, you’ll get a leak alert on the smartphone app in real time.

Does it only detect standing water or does it detect drips?: This water leak detector is used to detect water leaks and floods. Once a water leak occurs, the device will sound a continuous alarm paired with a flashing red LED.

Can I put this in my bathtub so that if I forget to turn off the tub, the alarm will sound before it overflows?: You could put it in the corner by the bathtub. The alarm would go off as soon as the tub became full.

Does it have a low battery notification?: When the battery is low, the LED indicator will flash red once every 60 seconds paired with a beep. Your app will warn you with a low battery notification.

Very easy to setup

Very easy to setup , even for me. ! Great peace of mind ! Thanks a bunch !

this is my 3rd home/office purchase

this is my 3rd home/office purchase. Love this product. Easy to use/set up. Amazing to get notified on my smartphone of any leaks. I was literaly placing one of the water leak sensors behind a toilet and it started alarming, I had not notices a leaky valve and the floor was wet. I also go the temperature sensors. The first night in my kitchen cabinet with 6 degrees outside I got a notification the temp was 36 degrees in my cabinet, i mad sure to leave the cabinet open after that.

Very happy with these

Very happy with these sensors

Water heater leak

Best leak detector on the market. It works. My water heater sprung a leak and it alerted me before damage could’ve been really bad.

Great

Great, robust.

1 2 3

Smart Water Leak Sensor

Constantly monitors home water leaks

Monitors Water Leaks Remotely

When a leak occurs, the base station and water leak sensor will not only sound a loud alarm, but you'll also receive instant notifications on your phone. You can silence the system simply using the app.

No Wiring or Setup Required

With a wire-free design and minimalist style, the water leak detector is perfectly conceived for where it’s needed most – those small, hard-to-reach spots. This device also lasts up to 5 years and is easily monitored through the X-Sense Home Security app for added peace of mind.

Test/Silence Button

This test/silence button allows you to silence an alarm or check if the water leak sensor’s buzzer and LED indicator are working properly. You can also test the device by tapping the Device Test button on the app’s device settings page.

Replaceable Batteries

This device runs on 2 replaceable 3-year AAA batteries. When the battery is low, you will hear a beep every 60 seconds with the LED flashing red to remind you to replace it. A low battery notification will also be sent to your phone via the app.

Specifications Of Base Station

Specifications Of Water Leak Sensor

FAQs

Customer Reviews